
If you have ever had an RC boat session ruined by winding aquatic weeds, discarded fishing line, or shallow pond debris around a prop shaft, the TX768 Jet Catamaran is built for your peace of mind. By dropping traditional external rudders and exposed propellers in favor of an internal turbojet propulsion drive, this 40cm rig draws water straight through a protected bottom intake grate and blasts it out the stern. That means you can skim across weed-filled edges and shallow waters where standard submerged props would seize or snap.
Under the hood, the TX768 skips entry-level brushed motors. Driven by a 2212 brushless motor tied to a 20A water-cooled ESC running on 3S (11.1V), this hull punches out top speeds over 30 km/h with instant throttle response. To handle hard carving turns without taking on water, the hull features a double-sealed inner and outer hatch secured by twist locks, alongside a dedicated 9g waterproof steering servo to keep your lines tight.
This boat hits the sweet spot for intermediate RC bashers who want a fast, low-maintenance watercraft, as well as beginners looking to bypass starter boats. While seasoned boaters will appreciate the clean water-cooling loop and high-gain 2.4Ghz control range exceeding 250 meters, anyone looking for stress-free, fast pond runs without constant prop clearing will feel right at home with the TX768.
6 Key Features
-
Prop-Free Turbojet Propulsion: Sealed internal vortex jet propulsion draws water through a screened intake, allowing high-speed runs over shallow beds, reeds, and water hazards without prop tangles.
-
Water-Cooled 2212 Brushless Motor: Active water jacket cooling circulating direct from the hull keeps thermal build-up down during full-throttle 30+ km/h speed passes.
-
2S–3S 20A Water-Cooled ESC: Sealed electronic speed control configured to handle 11.1V 3S power setups, providing smooth linear throttle control across the band.
-
Double-Sealed Hatch with Twist Lock: Dual inner and outer canopy seals with physical locking latches guard the receiver, servo, and battery bay against water ingress.
-
Hydrodynamic Catamaran ABS Hull: Lightweight 600g ABS twin-hull structure reduces drag, boosts lateral stability, and cuts cleanly through surface chop.
-
Proportional 2.4GHz Control & 9g Servo: High-frequency radio system offering 250m+ range paired with a high-torque 9g waterproof servo for responsive steering.
Specifications
| Parameter | Specification |
|
Product Model
|
TX768 |
|
Hull Type |
Catamaran Speedboat |
| Hull Material | ABS Plastic + Metal Hardware |
| Dimensions | 39.7 cm × 12.7 cm × 9.3 cm |
| Boat Weight | 600g |
| Top Speed | > 30 km/h |
| Motor | 2212 Brushless Motor |
| ESC | 20A Water-Cooled ESC (2S–3S Compatible) |
| Servo | 9g Waterproof Servo |
| Battery | 11.1V (3S) 2000mAh 15C LiPo / Li-ion |
| Radio System | 2.4GHz Proportional Control |
| Control Range | ≥ 250 meters |
| Run Time | ~10 minutes per charge |
| Charge Time | ~180 minutes |
What's in the Box
-
1× TX768 High-Speed Turbojet RC Catamaran Boat
-
1× 2.4GHz Transmitter
-
1× 11.1V 2000mAh 15C LiPo Battery Pack
-
1× USB Charging Cable
-
1× Acrylic Display / Maintenance Stand
-
1× User Manual & Hardware Kit